Archives: Shop

Description.

Laboratory, Testing

Laboratory, Testing

 

Verified quality…

secutex has a test laboratory with modern equipment for ongoing quality tests and also for the development of new materials:

1. Universal testing machine

The universal testing machine is a professional testing machine for performing tensile, compression and bending tests. With these tests, the universal testing machine can determine important material characteristics such as elongation at break, yield strength or tensile strength of the specimen.

2. Abrasion Tester

Purely mechanical abrasion is achieved by parallel sliding of two surfaces against each other; this is simulated in the standardized abrasion test. The polyurethane sample is subjected to real abrasion stress, and the time taken to destroy it allows conclusions about its abrasion resistance.

3. Weather Tester

The QUV weather tester reproduces the damage caused by sunlight, rain and dew. In a few days or weeks, the QUV UV Tester can reproduce damage caused during months or years of outdoor exposure. The QUV tests materials by exposing them to alternating cycles of UV light and moisture at controlled high temperatures. It simulates the effect of sunlight with special UV fluorescent lamps, the effect of dew and rain is simulated with condensing moisture and/or spray water.

4. Temperature Tester

Several material samples are inspected and heated in stages and then the condition is visually evaluated. In addition, the previously heated material samples can be tested in a tensile test, the results allow the material to be evaluated at the different temperatures.

5. Friction Coefficient Tester

secutex elastomers have excellent friction and therefore are very well suited for the use in transport racks.

The coefficient of friction is a very important factor in load securing, it must be proven and known. The value depends on the combination of the two friction partners and cannot be general. The logical consequence is that the coefficient of friction must be tested individually. For this purpose, secutex has a universal testing device, the evaluation is then done on the universal testing machine.

The coefficient of friction is the measure of how high the friction force between two materials is and is stated with the formula symbol “µ”. The friction force depends on many different factors. These would be for example material, temperature, humidity, surface, etc.

Powerflex [P1] und [P2]

This very compact thin layer surrounds the lifting strap either on a single side or completely.

Compact thin coating

This very compact thin layer surrounds the lifting strap either on a single side or completely. It is extremely wear-resistant and ideal for very rough surfaces. The Powerflex coating provides additional protection to the textile against dirt and the penetration of foreign particles.

End fittings

  • Various loop designs
  • D-Ring
  • C-Ring

Powerflex coating

Abrasion and fabric protection

 

Foreign particles and liquids often penetrate easily into the textile fabric of the lashing belt. If the dirty lashing belt is put under stress, foreign particles and individual textile fibres break apart. Penetrating liquid reduces or even removes the payload capacity of the entire lashing belt. When considering the respective conditions for use, protecting the fabric is essential. “secutex Powerflex“ is an especially thin spray-on coating. Thanks to special manufacturing, “Powerflex” can penetrate deep into the fabric, coating the textile strands entirely. Foreign particles can no longer penetrate and are easy to remove from the surface of the band.

Double-sided coating “Powerflex” can be used everywhere where fabric protection and extreme abrasion protection are at the forefront and the high flexibility of the lashing belt should be retained. Because the lashing belt is completely coated, both sides can be used as the contact side. Dangerous mix-ups are now a thing of the past.

Powerflex protective sleeve

The Powerflex protective sleeve helps to effectively increase the friction values of smooth surfaces.

Abrasion protection

The Powerflex protective sleeve helps to effectively increase the friction values of smooth surfaces or to protect the lifting strap against rough surfaces. The particularly-robust Powerflex penetrates deep into the fibres and also protects the protective sleeve against the penetration of fluids or dirt particles.

PowerflexPlus protective sleeve

Our Powerflex coated lifting slings are often used on construction sites, in outdoor conditions and when wet and dirty water is present.

The new Green, the new PowerflexPlus+

Our Powerflex coated lifting slings are often used on construction sites, in outdoor conditions and when wet and dirty water is present. Especially for these applications, now we have significantly improved our Powerflex thin coating. By changing the main components, we were able to reach a 2 – 3 times better lifetime in combination with wetness. We make this better performance clear by name with the Plus+ behind the well-known Powerflex name. And to make this improvement also visible, we have given the coating a new green color.

The very compact PowerflexPlus+ thin coating covers the lifting sling on one side or completely. It is extremely abrasion-resistant and ideal for very rough surfaces. The PowerflexPlus+ coating
also protects the fabric against dirt and the penetration of particles.

Prallschutz-Ausführungen in der Übersicht

Prallschutz-Ausführungen in der Übersicht

 

Prallschutz ohne Lochblech

secutex-Prallschutz ohne Lochblecharmierung lässt sich hervorragend an den Einsatzbereich anpassen, z.B. als Formteil oder Plattenware. Das Material bietet höchste Elastizität und lässt sich einfach durch Kleben überall dort befestigen, wo Bohren oder Bieten nicht möglich ist.

 

Prallschutz mit Gewebeeinlage

Die Gewebeeinlage unterstützt die Stabilität ohne die Flexibilität von secutex-Prallschutz einzuschränken. Gleichzeitig verhindert das Gewebe eine Dehnung in Längs- oder Querrichtung weitgehend und bleibt auch bei „Scharfen Kanten“ formstabil. secutex-Prallschutz mit Gewebeeinlage kann nach Anweisung verklebt oder mit großflächigen Blechscheiben oder Flacheisen befestigt werden. Eine innenliegende Glasfaserverstärkung erhöht die Widerstandsfähigkeit noch weiter.

 

Prallschutz mit Lochblecheinlage

Eine Lochblecharmierung im secutex-Prallschutz verhindert die Längs- und Querdehnung des Materials. Über das Lochraster lassen sich außerdem Schrauben, Nieten oder Schweißpunkte flexibel setzen.

 

 

Prong protection coil SZ-C

The prong-protection coil is optionally available with or without drive-in chamfer.

Coil fork protection with / without drive-in chamfer

Make your forklift even more flexible with the a secutex prong protection coil. After you have secured everything for careful transport, back the lift prongs out of the secutex prongs protection coil and continue to use the forklift normally. Mounting various prongs can be omitted. The secutex prong protection coil is carried by both prongs. The secutex protective coating avoids material damage and prevents the coils from slipping.

Prong protection SZ-G

Fork protection shoe with textile fabric insert – very light and specially designed for flexible use.

Fork protection shoe with fabric insert

This prong-protection shoe with textile fabric insert is light-weight and designed for special and flexible use. It is placed on the fork prongs. The prong-protection shoe is optionally available with a textile fabric insert and with fastening brackets.

Surface structures

We offer special surfaces for exceptional applications under the influence of water, oil or ice. Speak with your professional consultant today!

Prong-protection shoe SZ-HR

Fork protection shoe (semicircular design)

Fork protection shoe (semicircular design)

 

The impact protection surface of the prong-protection shoe is semi-circular. Round loads, such as concrete pipes etc., can be securely and carefully transported. The slightly angled prong tip makes retracting the load easier.

Surface structures

We offer special surfaces for exceptional applications under the influence of water, oil or ice. Speak with your professional consultant today!

Prong-protection shoe SZ-S1

Standard version with flexible tip

Standard version with flexible tip

 

The normal version is designed for flexible use. It offers easy and quick handling and is optimally designed for the majority of uses. The specially developed “flexo tip” safeguards loads and prongs. secutex prong-protection shoes are also available in stainless steel, e.g. for the food industry.

Surface structures

We offer special surfaces for exceptional applications under the influence of water, oil or ice. Speak with your professional consultant today!

Prong-protection shoe SZ-SSL

The prong-protection shoe heavy duty design is specially designed for heavy duty use.

Heavy duty design with steel tip

 

The SZ-SSL is a specially developed prong-protection shoe for the highest demands. The robust profile constructed from steel with a steel point is especially designed for hard, prolonged use.

Surface structures

We offer special surfaces for exceptional applications under the influence of water, oil or ice. Speak with your professional consultant today!

Prong-protection tubular module SZ-RM

For the transport of coils and wire coils.

Pipe module fork protection

The prong-protection tubular module optimally protects sensitive, round loads. It is extremely wear-resistant, strong against slippage, and easy to exchange. The prong-protection tubular-module is easily pushed onto the existing mandrel and affixed with the end cap. The individual sections can rotate freely to accommodate any movement of the load and reduce wear.

Prongs with resistant coating SZ-F1

Optimum protection for load and lifting device with low space requirements.

Forks with fixed coating

secutex prongs are selected when products and good must be securely and carefully transported on a consistent basis. The design offers optimal load and lifting-device protection in situations with limited space. The secutex resistant coating is inseparably connected to the fork prongs and the perforated plate prevents the fork prongs from detaching. A crossbeam on the tip of the fork prong prevents the secutex coating from detaching.

Prongs with resistant coating SZ-F2

Shanks with fixed coating – optimum protection for goods that protrude over the edge of the pallet.

Shanks with fixed coating

The design offers optimal protection to goods that stick out from the edges of the palette, for example. The secutex coating is inseparably connected to the fork shank. The perforated plate prevents the fork prongs from detaching.

Prongs with resistant coating SZ-F3

Prongs and shanks with fixed coating – especially wear-resistant, noise-absorbing and cushioning.

Prongs and shanks with fixed coating

secutex prongs are selected when products and good must be securely and carefully transported on a consistent basis. secutex impact protection is especially wear resistant, noise cancelling and dampening. It is approved for prolonged use. As part of this design, the fork prongs and fork shanks are permanently coated with secutex impact protection.

Protective sleeve, double-sided [SF-2]

Protective sleeve with double-sided coating – particularly robust and has two contact sides in this version for work on both sides

Protective sleeve with double-sided coating

This protective sleeve is particularly robust and has two contact sides in this version for work on both sides. Both contact sides are coated with secutex. They are extremely resistant and minimize the build-up of wrinkles in the textile. Use of the protective sleeve is no longer necessary.