Description.
The SKD-2 hinged edge-protector is a massive edge protector for cable grummets.
The SKD-2 hinged edge-protector is a massive edge protector for cable grummets. The edge-protector flexibly adapts to the load, increasing the radius over critical edges and distributing the lifting forces over a larger area. The cable and load are equally protected.
The fork extension extends your forks into a closed design.
Fork extensions are the ideal solution where loads need to be transported that are longer than the fork prongs.
Please note:
The extension must be supported by at least 60% of the existing fork prong. The carrying capacity of the fork extension is dependent on the particular fork. Please pay attention to the carrying capacity and centre of gravity of the forklift truck.
The fork extension extends your forks.
The SZ-GVO is an ideal extension that is very light. As with all fork-protection products, the SZ-GVO can be outfitted with a secutex buffer pad. The thickness and width of the fork extension are based on prong width, prong thickness and carrying capacity.
The fork extension offers all the advantages of the secutex coating.
The fork extension offers all the advantages of the secutex coating. Because it is welded, it is especially robust and sturdy as well as noise absorbent and slip-resistant. It can be simply pushed onto the prongs and secured with a bolt and cotter pin without tools.
secutex fork protection with a hollow profile is a robust design to protect the transported goods.
Sometimes, the load rests upon the shank of the fork during transport. In these cases, transported goods and the fork shank must be protected from damage. The secutex fork-shank protection with a hollow profile is a robust version designed to protect the transported goods. The hollow chambers have a cushioning effect when loads collide. Usages include, for example, transportation of stones in the brick industry or concrete pipes in the concrete industry. The fork-shank can be fastened with a steel belt to the back of the fork and can be easily exchanged.
secutex fork protection for careful transport
Sometimes, the load rests upon the shank of the fork during transport. In these cases, transported goods and the fork shank must be protected from damage. secutex fork-shank protection with foam padding is designed for careful load transportation. The degree of compression of the foam is dependent upon the collision. The foam reforms after the stress has subsided. Usages include, e.g. transport of sensitive dry walls, roofing tiles, etc. The fork-shank can be fastened with a steel belt to the back of the fork and can be easily exchanged.
The secutex fork-shank protection is a special design with a hollow profile and foam insert.
The secutex fork-shank protection is a special design with a hollow profile and foam insert. For example, it is suited to the transport of delicate drums on EUR-pallets. The colliding of the drums is absorbed through the flexible foam padding, whilst the impact of the pallet is absorbed through the sturdy hollow-profile design. Usages include, for example, transport in the chemical or glass industries.
The fork-shank protection is attached to the fork shanks via steel bands and is thus easily exchangeable.
Maximum safety, no slipping thanks to innovative secuGrip technology. Flexible, durable and stable for any load.
The innovative surface structure of our heavy-duty anti-slip mats in accordance with VDI 2700 ensures that your load literally stays in place. No slipping, no wobbling – maximum safety on every route.
The fabric reinforcement provides additional stability and, thanks to secuGrip technology, you will experience durability that you can fully rely on. Whether you glue them down or use them as a flexible underlay, these mats adapt to your individual requirements and always offer you optimum protection.
Hinged edge-protector for chains when a sling with edge protection must be used.
The attachment chain may only be used as an attachment accessory without edge protection if a 20% reduction in load lifting capacity is taken into consideration or if the next-largest chain thickness is used. Otherwise, a secutex SK-K hinged edge-protector must be used.
A “sharp edge” exists when the edge radius is smaller than the nominal thickness of the lifting chain. Further information is available in the “sharp edge“ chapter.
By means of a hinge, the edge protector SK-B can be optimally suited to fit any load geometry.
By means of a hinge, the edge protector SK-B can be optimally suited to fit any load geometry. It can be optionally equipped with magnets to better retain its position on the magnetic load. The edge protector can be quickly secured to the edge of the lashing belt by means of mounting slits. The lashing belt slides through the secutex clip which remains on the lashing belt despite collisions.
By means of a hinge, the edge protector SK-D can be optimally suited to any load geometry.
By means of a hinge, the edge protector SK-D can be optimally suited to any load geometry. The edge protector can be quickly secured to the edge of the wire cable by means of mounting slits. The wire cable slides through the secutex clip which remains on the lashing belt despite collisions.
Buffer pad with hollow profiles offer a particularly high crumple zone thanks to their hollow chambers.
secutex special profiles offer a particularly high crumple zone due to their hollow cavities. The particularly robust secutex buffer pad pushes the profile back into its original shape after loading. The robust design dampens noise during impact and protects the fragile goods.
secutex Soft coated by a Powerflex surface
If secutex Soft is coated by a Powerflex surface, dirt particles and liquids are prevented from penetrating the foam. Additionally, open-pore material protects against abrasion, without losing its elastic properties.
Foam core with closed surface
As opposed to secutex Soft, the SoftPad forms a fully sealed outer skin that protects the material from liquid and dirt penetration from all sides.
Impact protection Flat without reinforcement, optionally with cast-in fabric reinforcement.
The SP-F grade contains no reinforcement and can be perfectly adapted to the place of use. Where screwing or riveting is not possible, it can be easily fixed by gluing with the special secutex adhesive. As a sheet or moulded part, SP-F retains its maximum elasticity, depending on its thickness. At the same time, it remains particularly resistant to abrasion and wear.