secutex, one layer better!

The secret of the secutex coating is its excellent bonding properties. It penetrates deep into the roughly structured and robust special fabric of the and guarantees a long lifetime of use and perfect functionality.

• secuFlex
  In this version, the lifting sling is coated with two two different types of coating. The secutex-side of the sling is extremely cut-resistant. Powerflex on the backside prevents abrasion and protects the fabric against dirt and the penetration of particles.
• secutex 2-sided
  The two-sided secutex coating protects the lifting sling all around. Consequently, it offers double safety. So you can use both sides as a lifting side.
• Option, secutex Coating is also available with the TopDrain surface. The “TopDrain” structured surface works like a drainage and ensures the frictional connection of the secutex coating to the load.
• Option, secutex is also available with the approved metal chip reinforcement for “super-sharp edges”.
• Option, equiped with C-hook (Shoker Hook).
  The C-hook ensures quick and easy load handling, and it also holds the unbundeled load together.

The Powerflex spray coating is applied thinly to the webbing sling. The coating penetrates deep into the into the robust special fabric of the lifting sling and provides excellent abrasion resistance (No cut resistance).

• The Powerflex lifting sling can also be used on very rough surfaces, because the Powerflex coating provides extreme abrasion resistance and wear reduction.
• A longer lifetime
  The Powerflex coating seals the lifting sling. Moisture, dirt and particles cannot penetrate into the webbing.
• Better handling
  Because of the Powerflex coating, the lifting sling is slightly stiffer and can therefore be easily pushed under loads.
• Because of the Powerflex coating, the lifting slings can also be used well in dirty water areas. Simply wash off after use.
• The Powerflex lifting slings are perfecy for lifting concrete elements that do not have sharp edges. The thin coating protects the lifting sling reliably.

secutex turning sling is the simple and easy-to-use solution for lifting and turning up of stacked coils up to 2t weight. During the lift, the sling moves freely in the secutex sleeve, the secutex sleeve is covering the edges of the coil. So there is no movement and no wear at the “sharp edges”.

• The end loop of the secutex lifting sling for slit coils has a flat form and can simply be pushed into the gap between the coils.
• The flat end loop is simply hooked into the forged C-hook. Then the secutex sleeve is positioned at the “sharp edges” of the coil.
• Extra light, because the textile sling offers a significant weight advantage against wire rope or chain.
• Durable because the end loop of the turning sling is also coated and therefore protected against damage.
• Option: secutex turning mat
  During a turning process, the lower edge of the load “rolls” on the floor. The secutex turning mat protects the load and prevents it from slipping away.

secutex CombiTex, The perfect combination of two (2) lifting sling forerunners and one (1) wear sling. The wear sling has flat end loops on both sides and is simply hooked into the C-hooks at the end of the two forerunners.

• of the textile slings are very flat and can be easily pushed under the load. The stiff lifting slings can be pushed through without any problems even with low heights of passage.
• Rationalization, because the crane is no longer required to be lowered all the way down. Customers report a significant increase in the speed of load handling.
• Extra light, because the textile sling offers a significant weight advantage against wire rope or chain.
• Low cost, because only the economical wear sling needs to be changed!
• Durable because the end loop of the wear sling is also coated and therefore protected against damage.

Fixed protective sleeve with movable fixed coating; The new patent-protected secumove coating combines the advantages of a protective sleeve with the benefits of the fixed coating. The protective secutex coating is permanently attached to one layer of the lifting sling. The other layer of the lifting sling slides through the sleeve and is responsible for length compensation. As a result, the secumove ensures that there is no movement at the “sharp edge”.

• No movement, no wear: If nothing moves, there is no wear. As a result, the lifespan of the new secumove coating is significantly better in rough applications.
• Extra light, because the textile sling offers a significant weight advantage against wire rope or chain.
• The secutex material is extremely cut and wear resistant.
• Option, secumove is also available with the TopDrain surface. The “TopDrain” structured surface works like a drainage and ensures the frictional connection of the secutex coating to the load.
• Option, secumove is also available with the approved metal chip reinforcement for “super-sharp edges”.

Most of the damages at sharp or rough edges are caused by the movement of the load across the sling. In the case of loads with a “sharp edge” or with a very rough surface, a protective sleeve or fixed coating must be used to protect the textile lifting sling. If the load moves sideways, a cutting movement on the edge is the result. Similar to a knife blade, the edge can cut through the fibers of the textile sling.

• The new “TopDrain” surface drainage provides good adhesion of the protective sleeves and the coated lifting slings even on wet and oily materials.
•  The liquid can drain off into the surface hollows and the load lies securely in the lifting sling.
• The “TopDrain” structure works like a drainage and ensures the frictional connection of the secutex coating to the load.
• The patented steel chip reinforcement prevents sharp edges from penetrating into the lifting sling and also preserves the high flexibility of the secutex sleeve.
• The cutting edge is stopped by the steel chip reinforcement, the lifting sling keeps undamaged.