Wind industry

secuFoam

Made for extra heavy rotor blades: secuFoam storage mats

The much larger and significantly heavier rotor blades also require new storage profiles. Especially the extreme stresses of sea transport with a high number of load cycles are very demanding on the material.
The sponge rubber mats used up to now are not stable enough; the cell structure collapses under the high weights. Also, users always complain about the black wear marks caused by the rubber.

secuFoam

Made for extra heavy rotor blades: secuFoam storage mats

Closed cell structure, no water absorption
Permanent load stable, so also suitable for rotor blades > 20t dead weight
Optionally with large oval knobs, so that rain or sea water can run off and the blades stand dry
Guaranteed friction > 0.6μ (individual verification required)
No rubber, therefore no black marks and resistant to oil and lubricants

Further application possibilities show the diversity of our wind industry products.

secutex secuPad HD

secutex SPL-Module

Friction guaranteed:

secuPad for the transport and storage of monopiles
The large and extremely heavy monopiles also require new storage profiles. Especially the extreme stress during sea transports with a high number of load changes put extreme stress on the material.
The polyurethane used up to now is not sufficiently sturdy, load capacity and also friction are often not proven. Also, users often report that the standard materials used become brittle and oily to feel after a short period of time.

Developed for extreme heavy-duty applications
Load capacity 50 N/mm2
With fabric reinforcement, ensuring extreme strength
Solid steel plate with all-round steel frame
With secuGrip top coating, coefficient of friction >0.6μ
(must be verified separately)
Seawater resistant

Trailing edge protectors

secutex secuPad HD

Clamped with care:

secutex Trailing edge protection

The trailing edges are the most fragile element of the rotor blade and must be protected in a safe way. secutex has developed 2 types of trailing edge protectors which can be used in combination with standard lashings. The new secutex trailing edge protectors are very handy and compact and will be adapted to the specific shape of the rotor blade.

Distributes the lashing force equally, for lashing of rotor blades, in combination with standard lashing equipment
Inlay adapted to the trailing edge of the rotor blade
Type I=flexible and light, completely out of polyurethane
Type II=with steel reenforcement, stiff against bending, so no stress on the glued trailing edge
Easy to handle

secutex impact protection flat

Trailing edge protectors

One layer better!

secutex protection for transport and storage racks. Very simple mounting in combination with a very good stability.

No lengthwise or crosswise expansions because of the integral perforated metal reinforcement.
Easy fastening by screws or rivets.
Simple assembly; optionally with cast-in bore holes.
secutex is extremely elastic and absorbs noise.
Extreme wear resistance, secutex is better than some metals.