secutex - easy to work with!

It is just one of the material’s characteristics. As all other PUR products, secutex experiences a volume reduction of

1-3 % during processing. secutex castings comply with the tolerances of M3 DIN 7715. Casting elements can be optimised in order to obtain accurate results. Our CNC-controlled processing machines also allow an extremely accurate mechanical tolerance.

Cutting and Sawing

Want to cut or saw secutex yourself? Just ensure that blades are extra sharp for cutting secutex.

 

A band saw can be used to saw the secutex material. Due to the excellent abrasion properties, the material
attempts to withstand or evade the cutting tool. Ensure a low wedge angle and adapt the cutting speed, where necessary.

Drilling

No special tools are required. Normal wood and metal drills suffice.
Important!

 

Cutting speed approx. 40 m/min., advance approx. 0.01-0.03 mm/rev. In the case of low shore hardness, secutex can evade the tool. The hole could therefore be up to 5 % smaller.

Milling

Use standard milling cutters with a low number of teeth.

 

Important! Peripheral speed approx. 200-400 m/min, clearance angle α 10°, effective cutting angle γ 25°. It is recommended that a cutting fluid is used for preparing the surface and cooling.

Grinding/roughening

secutex can be easily ground with grinding machines or belt grinders (standard grain size or ceramic bonding).

 

Important! Grinding speed of approx. 30-50 m/sec. Wet grinding is recommended.
Note: a wire brush can alsobe used for roughening.

secutex-Service

Please note that: Holes, stepped holes and threads can be included included during production in accordance with customer requirements and stipulated exact dimensions. Stamping work can also be carried out.